Industrial Fastener Supplier · Tianjin, China

Custom Screws, Bolts & Nuts — Made to Your Drawing

We supply non-standard fasteners and turned parts made to your drawing or sample, plus standard DIN / ISO / ANSI / ASME / JIS / GB parts for mixed trial orders. Send us your drawing and we will reply with a quotation and lead time.

  • Small trial orders welcome
  • Quotation with lead time
  • Inspection reports on request

From Drawing to Delivery

A typical production route for custom fasteners — from engineering review of your drawing through manufacture, inspection and packing for export. The exact steps depend on the part.

  1. 1 Drawing
  2. 2 Material
  3. 3 Heading
  4. 4 Machining
  5. 5 Threading
  6. 6 Heat treat
  7. 7 Finishing
  8. 8 Inspection
  9. 9 Packing
  1. Technical drawing on a workbench, used as an illustration of engineering review
    1

    Drawing & Engineering Review

    We review your drawing or sample and confirm material, size, tolerance, thread and finish before quoting.

    Reviewing a technical drawing (illustration).

  2. Coil of steel wire, used as an illustration of raw material
    2

    Raw Material

    Steel wire, bar or other specified material is prepared to the grade you require.

    Steel wire coil (illustration).

  3. Worker forming a heated metal bar in an industrial press, used as an illustration of heading or forging
    3

    Cold Heading / Forging

    The head and basic shape are formed by cold heading or forging, according to the part.

    Forming metal in a press (illustration). This photograph shows hot forging rather than cold heading.

  4. Milling machine in a workshop, used as an illustration of CNC turning and machining
    4

    CNC Turning & Machining

    Where a part needs turning, milling or other machining, it is completed to the drawing.

    Machining in a workshop (illustration).

  5. Close-up of threaded rods, used as an illustration of thread rolling or cutting
    5

    Thread Rolling

    Threads are rolled or cut to the specified standard — DIN, ISO, ANSI/ASME, JIS or GB.

    Close-up of fastener threads (illustration).

  6. Computer-controlled heat-treatment furnace, used as a process illustration
    6

    Heat Treatment

    Heat treatment is applied when a strength or hardness requirement is specified.

    A computer-controlled heat-treatment furnace (illustration).

  7. Pipes after a hot-dip galvanizing bath, used as an illustration of surface finishing
    7

    Surface Finishing

    Parts can be zinc plated, hot-dip galvanized, black oxide, zinc flake (Dacromet) or nickel plated, as specified — or left plain.

    Hot-dip galvanizing (illustration).

  8. Digital micrometer measuring a metal part, used as an illustration of inspection
    8

    Inspection & Testing

    Dimensions and threads are checked with gauges and measuring tools. Other tests, such as salt spray, can be arranged on request.

    Digital micrometer in use (illustration).

  9. Palletized goods on warehouse racking, used as an illustration of packing and shipping
    9

    Packing & Shipping

    Parts are packed in cartons, palletized when required, and shipped from Tianjin by sea or air.

    Packed goods in a warehouse (illustration).

Illustrative photos; factory photos available on request.

Product Categories

Tell us what you need. If it is on a drawing or you have a sample, we can quote it. Photographs on this page are category illustrations, not pictures of a specific production lot.

Machine screws

Machine Screws

Pan, countersunk, cheese and hex-head machine screws, including Phillips, slotted, hex-socket and other common drives.

  • Typical size range: M2 to M36; other sizes on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Self-tapping screws

Self-Tapping Screws

Thread-forming and thread-cutting screws for metal and other materials, including countersunk and hex-washer heads.

  • Typical size range: M2 to M36; other sizes on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Bolts

Bolts

Hex bolts, flange bolts, socket-head bolts and other common types, fully or partially threaded.

  • Typical size range: M2 to M36; other sizes on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Nuts including lock nuts

Nuts, Including Lock Nuts

Hex nuts, nylon-insert lock nuts, prevailing-torque lock nuts and other common types, supplied alone or with matching bolts.

  • Typical size range: M2 to M36; other sizes on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Washers

Washers

Flat washers, spring washers and other common types, packed with fasteners or supplied separately.

  • Typical size range: M2 to M36; other sizes on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Studs and threaded rods

Studs & Threaded Rods

Fully and partially threaded studs, and threaded rod cut to the length you specify.

  • Typical size range: M2 to M36; other sizes and lengths on request
  • Standards: DIN, ISO, ANSI/ASME, JIS or GB, as specified
Custom and non-standard CNC turned parts

Custom & Non-Standard CNC Turned Parts

Special screws, bolts, nuts, pins, sleeves, spacers and other turned parts made to your drawing or sample — including special heads, lengths, threads and markings.

  • Typical size range: M2 to M36; other sizes on request
  • Made to your drawing, sample or to DIN, ISO, ANSI/ASME, JIS or GB where a standard applies

Applications

Fasteners are used across many industries. The photographs below are illustrations of typical end uses — not pictures of a particular customer project.

Engine assembly, used as an illustration of automotive applications

Automotive

Engine, chassis and assembly applications, to the specification you provide.

Steel structure, used as an illustration of construction applications

Construction & Steel Structure

Structural and general construction fastening.

Industrial machinery, used as an illustration of equipment applications

Machinery & Equipment

Industrial machinery, equipment and plant installation.

Rooftop solar installation, used as an illustration of electrical and solar applications

Electrical & Solar Installation

Electrical assemblies and solar-mounting applications.

Woodworking shop, used as an illustration of furniture and woodworking applications

Furniture & Woodworking

Furniture hardware and woodworking fasteners, including custom parts.

Illustrative photos; factory photos available on request.

Materials

Please specify the material and strength grade in your RFQ. Other grades can be discussed on request.

Material Typical grades Typical use
Carbon steel Grades 4.8, 8.8, 10.9 and 12.9 General industrial fasteners
Alloy steel To the grade you specify Higher-strength or special applications
Stainless steel 304 and 316 Corrosion-resistant indoor and outdoor use
Brass To the grade you specify Electrical, decorative or non-magnetic parts

Surface Finishes

Common finishes are listed below. Plain / uncoated parts are also available. Please state the finish — and any coating thickness or salt-spray requirement — in your RFQ.

Zinc Plating

A widely used electroplated zinc coating for general indoor and light-duty corrosion protection.

Hot-Dip Galvanizing

A heavier zinc coating, typically chosen for outdoor or more demanding corrosion conditions.

Black Oxide

A dark conversion coating, often used where a low-glare appearance is preferred.

Dacromet / Zinc Flake

A zinc-flake coating system used where higher corrosion resistance is specified.

Nickel

A nickel-plated finish for appearance and additional corrosion or wear resistance.

How Custom Orders Work

A clear path from your drawing or sample to shipment.

  1. 1

    Drawing or Sample

    Email or WhatsApp us your drawing, sample photo or specification, together with material, finish, quantity and destination.

  2. 2

    Quote

    We review the technical details and reply with a quotation and lead time.

  3. 3

    Sample

    For custom parts, we can make samples for you to check before mass production. Sample arrangements are discussed per project.

  4. 4

    Approval

    Once you approve the sample — or the agreed specification — the order is confirmed for production.

  5. 5

    Mass Production

    Your parts go into production according to the approved drawing, sample and specification.

  6. 6

    Inspection

    Parts are inspected before shipment. Inspection reports are available on request.

  7. 7

    Shipping

    Goods are packed for export and shipped by sea or air to your country.

Quality and Inspection

We check parts before they leave. Tell us if you need a particular inspection method or report with your order.

Dimension Checks

Critical dimensions are checked against the drawing or the agreed specification.

Thread Gauges

Threads can be verified with gauges so the parts fit as specified.

Salt-Spray Testing on Request

Salt-spray testing can be arranged on request when a corrosion requirement is specified.

Reports on Request

Inspection reports and other quality documents are available on request. Please say what you need when you enquire.

Packaging and Shipping

We pack for export and ship from Tianjin, a major port in northern China.

Cartons and Pallets

Parts are packed in cartons. Cartons can be palletized for container or air-freight handling. Special packing can be discussed if you have a requirement.

FOB Tianjin / Xingang

A typical term is FOB Tianjin (Xingang). Other commercial terms can be discussed in the quotation.

Sea or Air

We can arrange sea freight or air freight to your destination, depending on quantity, urgency and your preference.

Markets We Serve

We work with importers, distributors, equipment manufacturers and contractors in Southeast Asia and the Middle East, including:

VietnamThailandMalaysiaUnited Arab EmiratesSaudi Arabia

Buyers in other countries are also welcome to contact us.

Frequently Asked Questions

What is the minimum order quantity (MOQ)?

MOQ is flexible and depends on the part. Small trial orders are welcome. Tell us the quantity you need and we will advise what is practical for that item.

Can I get samples before a bulk order?

The sample policy is discussed per project. For custom parts we can usually make samples for approval before mass production. Time and cost depend on the part.

How long is the lead time?

Lead time depends on the quantity, the complexity of the part, and the material and finish. Every quotation includes a lead time so you can plan your purchasing.

What payment terms do you accept?

Payment terms are negotiable and will be confirmed in the quotation.

What should I include in an RFQ?

A drawing (PDF, DWG or STEP) or clear photos of the sample, plus material and grade, surface finish, quantity, and the destination country or port. The more complete the information, the faster we can quote.

Request a Quote

To get an accurate quotation quickly, please include:

  • Drawing (PDF / DWG / STEP) or clear photos of the sample
  • Material and strength grade
  • Surface finish
  • Quantity
  • Destination country or port

We will reply with a quotation and lead time.

Email Your RFQ WhatsApp Us
Email
wangwey1688@outlook.com
WhatsApp (text messages only, no calls)
+86 138 2107 7653
Location
Tianjin, China